Mobile Sandblasting can transform your pool, house, boat or building.

We are licensed for both residential and commercial sandblasting needs.

RW Little Co. specializes in sandblasting surfaces that include metal, wood, concrete, brick, and block.


So how does RW Little Co do it?

Sandblasting equipment consists of a chamber in which sand and air are mixed. The mixture travels through a hand-held nozzle to direct the particles toward the surface. Nozzles come in a variety of shapes, sizes, and materials, so the right nozzle needs to be chosen by an experienced professional to suit each job. Tungsten carbide is the most popular nozzle liner material for mineral abrasives. Silicon carbide and boron carbide are more wear resistant and are for use with harder abrasives such as aluminum oxide.


Residential Services

If the paint on your home is peeling, it is highly likely that your home may need to be sandblasted. There is no "typical" home in San Diego as we are so diverse with our styles. For an average-sized home, we can typically remove the home's paint in one day, provided there is no undercoating.


Factors that determined the length of time spent sandblasting depend on the size of the house. How many coats or what types of paint have been applied.  How tight the paint is on the building. If there is a rubber coating under the paint. In some cases, we will not know what factors may exist until we begin to sandblast.

Commercial Services

Sandblasting a building's exterior can restore the original block or brick veneer, eliminating the need and cost associated with maintaining a building's exterior. We sandblast wood beams from the exterior or interior of properties and we have extensive experience in sandblasting graffiti off of block walls, new architecturally designed buildings, and the removal of mill marks and strap marks on the wood of both buildings & custom homes.


Additional Services

Do you own an auto shop, semi-trailer truck, or a boat that need refinishing? Our sandblasting services can't be beat!



Powder coating is a metal finishing process that offers an alternative finish to paint. Powder coat offers greater durability, impact resistance, and improved wear characteristics in comparison to other finishing options. In addition to the improved durability, powder coating is offered in a great variety of finishes. Finishes include the basic gloss, semi-gloss, and flat finishes to unique texture, wrinkle, hammer tone, and candy finishes. There are thousands of colors available to choose from and if a specific color is needed then custom color matches can be made to match. Powder coating also provides quick turnaround times as once it is cooled back to room temperature it is ready for use. Feel free to call or email us to discuss your needs and the options available to you.

We take great pride in providing quality coatings. In order to provide our customers with the best coatings possible all of the items are properly prepped for coating. All parts are first cleaned of contaminants and prepped for media blasting. All parts are then media blasted to remove any previous finishes and provide the best possible surface for coating adhesion. After blasting, the part is examined and prepped for coating including taping and plugging where the customer does not want powder to be applied. We then apply the powder using our top of the line Powder Application Gun and bake in one of our 2 ovens that measure  29’ long x 9’ ½” wide x 6’ ½” tall and 22’ long x 12’ wide x 6’ ½” tall   oven at 400 degrees Fahrenheit for a full cure. Once the item is removed from the oven and cooled to room temperature it is ready for use.



TEL: (619) 297-3705       FAX: (619) 692-0418